Eastern General Hospital (EGH) is an upcoming hospital in Bedok North. Its website describes a hospital of about 1,000 beds, part of the SingHealth group, that is digitally enabled from the start and brings care closer to the community, including care in patients’ homes. A hospital of this kind cannot treat a pause in service as a minor event. Patients depend on it at the moments when they are least able to protect themselves.
This chapter opens Starting Your Business Continuity Management Implementation for Eastern General Hospital, the third eBook in the series Keeping Care Running: Managing and Implementing Business Continuity Management at Eastern General Hospital. It explains how the eBook is organised, what the business continuity management (BCM) planning methodology asks of EGH, and which Critical Business Function (CBF) this edition addresses: CBF-2 Critical Care (Intensive Care and High Dependency). It also records the full list of CBFs that marks the start of the business impact analysis (BIA) phase.
The series has three eBooks. Each builds on the one before.
Readers should treat eBook 1 and eBook 2 as pre-reading and guidance. They explain why EGH needs BCM and how the programme is governed. This eBook shows what the working documents look like once the programme begins.
This eBook is part of the value-added, complementary Training-led Implementation services provided to organisations that intend to implement a BCM project or upgrade an existing BCM programme. Under this approach, BCM Institute’s participants attend certification or competency-based training courses and, at the same time, complete the real planning templates for their own organisation. The learning and the implementation happen together, so the organisation leaves the course with working documents and not only with new knowledge.
The eBook compiles an organisation’s submissions on risk analysis and review (RAR), BIA, business continuity strategy (BCS) and plan development (PD) from such a planning exercise. For EGH, the content shows how the templates can be completed for a hospital. All figures, systems and partners in the chapters that follow are illustrative planning assumptions, and EGH must validate each one before relying on it. Facts about the hospital come from its website, and everything else is labelled as an assumption.
The methodology divides the work into four phases. Each phase has defined outputs, so that progress can be checked and the results passed to the next phase.
Table 1: The Four Phases of the BCM Planning Methodology and Their Templates
| Phase | Purpose | Templates and outputs |
|---|---|---|
| Risk analysis and review (RAR) | Identify threats and judge how likely and how harmful they are | List of Threats [RAR T1]; Treatment and Control [RAR T2]; Risk Impact and Likelihood Assessment [RAR T3] |
| Business impact analysis (BIA) | Find out what must be protected and how fast it must be recovered | Part 0: Corporate and BU MBCO [MBCO]; Part 0: Products and Services [P&S]; Part 1: Identification of Business Functions [BIAQ P1]; Part 2: Impact Areas of Business Functions [BIAQ P2]; Part 3: Impact Over Time of Business Functions [BIAQ P3]; Part 4: Supporting IT Systems and Applications [BIAQ P4]; Part 5: Inter-dependencies [BIAQ P5]; Part 6: Vital Records [BIAQ P6] |
| Business continuity strategy (BCS) | Choose how each function will be kept running or recovered | Mitigation Strategies [BCS T1]; Recovery Strategies and Justifications [BCS T2]; Minimum Resources Required during a Disaster [BCS T3] |
| Plan development (PD) | Turn the strategies into procedures that staff can follow | Business continuity plan procedures for each critical business function |
In the RAR phase, EGH lists the threats that could disrupt its services, records the controls that treat them, and rates each risk by impact and likelihood. This gives a view of what could go wrong before the BIA examines what would be lost.
The BIA phase uses a six-part set of templates for each critical business function, preceded by two Part 0 templates that set the corporate and business unit minimum business continuity objectives (MBCOs) and describe products and services. Parts 1 to 6 then identify the business functions, their impact areas, their impact over time, the supporting IT systems, the inter-dependencies and the vital records. Together they set the recovery time objective (RTO) and the maximum tolerable period of disruption (MTPD) for each function.
In the BCS phase, each critical business unit receives three requirements: mitigation strategies that reduce the likelihood or impact of disruption, recovery strategies with their justifications, and the minimum resources needed during a disaster. These answer the question the BIA raised: given what must be protected, how will EGH protect it?
In the PD phase, detailed BC plan procedures are written for the specific processes of each critical business function. The procedure covers preparedness, the first 24 hours of response and recovery, and restoration afterwards, with clear roles at each step.
The BIA starts from a list of the Critical Business Functions of the organisation. A CBF is a service whose disruption would quickly cause unacceptable harm to patients, breach legal or licensing obligations, or damage public trust. The list below marks the beginning of the BIA phase, and each function listed will be analysed in turn. EGH has identified 25.
Table 2: Critical Business Functions of Eastern General Hospital
| CBF Code | Critical Business Function | Focus |
|---|---|---|
| CBF-01 | Emergency Department Services | |
| CBF-02 | Critical Care (Intensive Care and High Dependency) | This eBook |
| CBF-03 | Operating Theatre and Anaesthesia Services | |
| CBF-04 | Inpatient Ward Care and Nursing | |
| CBF-05 | Maternal and Newborn Care | |
| CBF-06 | Specialist Outpatient Clinics | |
| CBF-07 | Virtual Healthcare and Telehealth | |
| CBF-08 | Diagnostic Imaging | |
| CBF-09 | Clinical Laboratory and Blood Bank | |
| CBF-10 | Pharmacy and Medication Management | |
| CBF-11 | Central Sterile Supply | |
| CBF-12 | Facilities Engineering, Power and Medical Gases | |
| CBF-13 | Infection Prevention, Control and Environmental Hygiene | |
| CBF-14 | Patient Registration, Admissions and Billing | |
| CBF-15 | Electronic Medical Records and Clinical Systems | |
| CBF-16 | Information Technology Infrastructure, Network and Cybersecurity | |
| CBF-17 | Hospital Command Centre and Communications | |
| CBF-18 | Security, Access Control and Safety | |
| CBF-19 | Patient Transport and Ambulance Coordination | |
| CBF-20 | Food and Nutrition Services | |
| CBF-21 | Discharge Planning and Community Care Coordination | |
| CBF-22 | Procurement, Supply Chain and Warehousing | |
| CBF-23 | Manpower Deployment and Staff Welfare | |
| CBF-24 | Finance, Payroll and Claims | |
| CBF-25 | Corporate Communications and Regulatory Liaison |
This edition of eBook 3 follows CBF-2 Critical Care (Intensive Care and High Dependency) through the whole methodology. The same steps apply to each of the other 24 functions, and later editions can address them in the same way.
The intensive care unit (ICU) and the high dependency unit (HD) hold the sickest patients in the hospital. They depend on ventilators, infusion pumps, monitors, medical gases and skilled nurses and doctors at every minute of the day. A gap of a few minutes in any of these can cause permanent harm. Many other functions rely on critical care too: the emergency department and operating theatres need beds for their sickest patients, and the wards need a safe place to send patients who deteriorate.
The Ministry of Health (MOH) regulates acute hospital services in Singapore under the Healthcare Services Act 2020 (HCSA), together with the Healthcare Services (General) Regulations 2021 and the Healthcare Services (Acute Hospital Service) Regulations 2023. This eBook refers to them in general terms only. EGH should confirm the exact obligations with its licensing and legal advisers.
The chapters that follow take the BIA, BCS and PD phases for CBF-2 in order. They break the function into Sub-Critical Business Functions, set minimum objectives, assess impact area and impact over time, identify supporting systems, dependencies and vital records, choose recovery strategies, set minimum resources and finish with a recovery procedure. Each chapter introduces its topic, presents a table that completes the template for EGH, and ends with a conclusion that links to the next step.
BCM at EGH is easier to start when the starting point is clear. This chapter has set out the three eBooks in the series, the reason for the Training-led Implementation approach, the four phases of the methodology with their templates, and the 25 Critical Business Functions that begin the BIA. It has also named CBF-2 Critical Care as the function that this edition follows.
The chapters that follow turn the templates into practical content. EGH should read them with its own clinical, nursing, engineering and digital leaders, correct the assumptions, and use the result to drive its own planning exercise.
Continue reading: Chapter 2, Sub-Critical Business Functions for CBF-2, breaks CBF-2 Critical Care into the 12 processes that deliver it.
| eBook 3: Starting Your BCM Implementation |
||||||
| MBCO | P&S | RAR T1 | RAR T2 | RAR T3 | BCS T1 | CBF |
| CBF-1 Emergency Department Services | ||||||
| DP | BIAQ P1 | BIAQ P2 | BIAQ P3 | BIAQ P4 | BIAQ P5 | BIAQ P6 |
| BCS T2 | BCS T3 | PD | ||||